SgurrEnergy has provided solutions to Floating Solar Photo Voltaic (FSPV/FPV) projects globally with a specialized team dedicated for delivering FPV projects.
Preparing solutions for FPV requires special engineering skills. Discovering new frontiers in the quest to find sustainable solutions has always been an engineer’s pursuit. FPV is one such avenue where we have successfully capitalized installation of floating solar panels on the water surface. The challenges of the water are different from the land, the solar panels need to be installed on the floats that consider various design critical parameters such as corrosion due to humidity in the vicinity, the wind speeds and hydrodynamic loads that would determine the anchors and mooring lines, the location, water type and type of structures predominantly dictate the design of the solution.
This is a relatively new entrant in the Solar PV segment, and demands a special skill set to devise and develop solutions, a project assessment usually entails a comprehensive understanding of the water body the FPV will be installed on. SgurrEnergy has a competent workforce with a technical rigor that has developed by delivering projects to some of the most challenging problems in this market segment.
Our
Proficiency –
Your Benefits
Detailed technical review of floater manufacturer/supplier with respect to various international standards.
Technical approach in understanding the meteorological data at project location. Site Flood risk assessment to identify any potential risk in the system and to provide appropriate and adequate mitigation solution.
Evaluating the drag force in the system by performing CFD as per the site wind rose diagram. Technical review of mooring lines and suggesting the type of mooring cables.
Technical review of anchoring system. Hydrodynamic analysis for estimating wave height using different statistical formula to ensure the stability in the system and avoid any catastrophic failure.
Reviewing wind tunnel test results supplied by vendor for appropriate estimation of wind forces. Estimation of corrosion as per the water test results and site specific atmospheric chemical constituents.
FEA stress analysis of spreader beam for worst anticipated loads and analysis of water level variation to account in the overall system design.
Our Services
Vendor Evaluation of floater manufacturer and Pre-bid support: review and evaluate all the potential Floater manufacturers technically as per National and International standards
Providing technical specification for bathymetry survey, floater RFP and geotechnical investigation RFP
Conducting Bathymetry Survey for Domestic projects and review for international projects
Review of floating compact substation
Review of anchoring and mooring as per international standards
Module/Equipment assembly and installation plan as per the floater vendor
Hydrology and Flood studies for project location
ESIA study
Review of floating cable tray
Review of walkway
Review of String inverter/String combiner box on floater
Review of spreader beam for anchoring and mooring
Technical Articles
Battery Energy Storage Systems (BESS) Technology and Applications
Collecting energy produced at a specific time interval to consume at pre-defined time periods is known as energy storage and ...
Importance of Eccentric Wind Loading on Monopitch Module Mounting Structures
Wind load governs the design of the mounting structures of solar panels which constitute approximately 10 to 15 percent of ...
Power Plant Controller
The solar PV and Wind plants are assets which needs to consistently produce power with maximum control and predictability. This ...
